Main FeatureslOptical amplifier for single channel like SDH/Sonet applicationslBooster, inline or pre-amplifier at customer’s choicelBooster power maximum 23dBmlPre-amplifier can include ASE noise filterlMid-stage for DCF compensation optionallSupervisory channel Add/Drop optionallPlug and play sys
Main Features
lOptical amplifier for single channel like SDH/Sonet applications
lBooster, inline or pre-amplifier at customer’s choice
lBooster power maximum 23dBm
lPre-amplifier can include ASE noise filter
lMid-stage for DCF compensation optional
lSupervisory channel Add/Drop optional
lPlug and play system or OEM modules
Description
The increasing demand for more bandwidth has quickly led to a greater need for transmission capacity. With the use of DWDM multiplexers, capacities on existing fibre optic connections have been increased immediately. However, long distance between nodes requires more optical power generated by the optical equipment.
Optical amplifiers are a good option to generate high optical power levels necessary for feeding of long trunk lines or high splitting ratios in the access network.
QL- EDFA 6600I-O is a low cost, ultra-compact and flexible optical amplifier with or without mid-stage access. It is based on our patented SmartGAIN technology. Depending on customer requirement, it can be configured as a C- or L- band EDFA, with fixed or variable gain.
Application Example: Most of applications for SDH/Sonet is point-to-point amplification. Distance can go as much as 300 km without mid-span repeater. Below diagram shows how optical amplifier is used for compensating DCF loss and boosting transmission distance. Figure A:

QL- EDFA 6600I-O point to point application
Benefits
lSFP VOA optional
lConfigurable as C or L band EDFA
lBuilt-in standard based network management, SNMPv2 Agent, iCEO B/S
lInput and Output Monitoring Tap
lRemote flash software update
lLow cost and ultra-compact 1U rack mount unit
Applications
lOptical amplifier for single wavelength transmission to achieve greater distances
lUpgrading the optical link budget to support 10G/40G/100G/200G etc. services
lSolving high loss or Long span in fiber infrastructure
lReducing the number of regenerators and sites along the fiber
Technical Specifications(System only)
Common Features | |||
Wavelength Range | C band: 1528 to 1565 nm L band: 1570 nm to 1608 nm | ||
Gain Flatness | Not Applicable | ||
Input/Output Detection range | 25 dB min. 35 dB max | ||
Optical Return Loss | 30 dB min. | ||
Polarization Mode Dispersion | 0.3 ps typ. 0.5 ps max. | ||
Polarization Dependent Gain | 0.2 dB typ. 0.5 dB max. | ||
Operation mode | AGC, APC, ACC | ||
Eye safety | Supported | ||
Management | |||
Remote Access | SNMP, iCEO B/S Web GUI | ||
Local Craft | CLI via RS232 | ||
Environmental | |||
Operating Temperature | -5 to 55 ℃ | ||
Operating Humidity | 5 to 95% (non-condensing) | ||
Storage Temperature | -20 to + 85 ℃ | ||
Mechanics | |||
Rack Mount Unit | 19” 1U | ||
Dimensions (H x W x D) | 44 x 437 x 440 mm | ||
Power | |||
Power Supply | Dual Redundancy -48 VDC, or 100/240VAC | ||
Power Consumption | <150W | ||
Application Specific | Booster | Inline | Pre-amplifier |
Minimum Input (dBm) | -20 | -30 | -40 |
Maximum Input (dBm) | Maximum Output - Specified Gain | ||
Minimum Output (dBm) | Minimum Input +Specified Gain | ||
Maximum Output (dBm) | <=23 | <=20 | <=13 |
Gain (Typical, dB, see note) | 5 ~ 15 | 10 ~ 25 | 15 ~ 35 |
ASE Filter (optional) | N/A | N/A | 200GHz |
Mid-stage Loss (optional) | From 3 to 12 dB customizable | ||
NOTES:
1) Customer specified output power shall be less or equal than above specification.
Gain for single channel amplifier is used as reference only for optimization purpose. Customer can set gain